Ramblings Archive

Tutorials suggestions for cgdigest.com

Hi guys,
Hopefully, in the following weeks I will have a little more spare time that I intend spend writing some new tutorials.
Bellow is a small list with what I intend to write about. I am hoping that you can come up with some more suggestions, so if you have any ideas feel free to post a comment.

Rendering liquids
Rendering wet materials
vray sss
How to setup a daylight interior illumination
Post processing an image from raw render to final output

I look forward to reading your suggestions.

Best regards,
Alex

New things in the 3d world

Hello everybody,

Sorry for not having posted anything for so long. I’ve been (and still am) busy with a project that I started planning about an year ago, and think it’s about time it goes live.

It’s a 3d models online store dedicated to digital architectural illustrators who want something new in their model libraries. I’m still working on some technical details, but hopefully it will be launched in about a week. I will let you know more when it’s done.

Until than, there are 2 things that caught my attention during the last couple of weeks.

The first one is a forum www.3dstocktalk.org where people who sell 3d models online are gathering to talk about the problems that they’ve encountered with different websites, and even revealing how much they made with several 3d market places.

The good thing is that Matt Anderson (owner of The3dstudio.com) and Jonathan Loyd from fallingpixel.com are also active on that forum and more than happy to answer to any questions you might have for them.

The second interesting thing is a search engine for 3d models and textures that is gathering data from several important 3d marketplaces (except turbosquid for which they don’t have permission to index anything) – www.3dfilter.com.

Although it is still in it’s early stages, and I’m not sure how the ranking system works exactly, I feel that this project has a lot of potential.

Hope you find these useful.

Best regards,

Alex Mincinopschi

Bad move by turbosquid

If you are selling 3d content online, you are already aware of the fact that turbosquid will be lowering the royalty rate to 40%. The only way to keep your royalty rate above 50% is to sell exclusively through them.
But it doesn’t end here; they came up with a scheme that classifies sellers by the total life time sales.

It goes like this:
0-150 usd –           clear level –         50% royalty
150-500 usd –       bronze level –     51% royalty
500-1500 usd –     silver level –       52% royalty
1500-3000 usd –   gold level –         54% royalty
3000-6000 usd –   emerald level –   56% royalty
6000-10000 usd – ruby level –         58% royalty
10000+ usd –        diamond level –  60% royalty

In my opinion, by trying to force their sellers to become exclusive, turbosquid intended to drive their competition out of business. If they were a little less greedy, they could have had a real chance to succeed.

It is well known that they have the largest market share; therefore people are selling more through them than trough other sites. If they offered a 75% royalty for the exclusivity I am absolutely sure that all their competition would be in real trouble.

In the current situation however, some sellers (including top sellers) are packing their bags, while many others are raising their prices and in the meantime look for other alternatives to sell their stuff. Also, new comers who are clearly disadvantaged by the new classification will most probably go somewhere else.

What are the alternatives?

1)    The3dstudio.com
2)    Fallingpixel.com
3)    3d02.com
4)    3dexport.com
5)    exchange3d.com
6)    Flatpyramid.com
7)    The123d.com
8)    Altairmodels.com
9)    Presto3d.com
10)  Digitalelements.be
11)  The-Blueprints.com

Some of these are too small or too new, but a few of them combined can make more sales than turbosquid alone.

I think that on the long run, buyers will also start looking for new places to shop around and turbosquid will become less and less popular. Already, judging by the alexa rank (a traffic indicator), The3dstudio is dangerously getting close to them.

In conclusion, I strongly believe that turbosquid’s intent to drive their competition out of business will do them a lot more harm that they could have expected.
I’m curious to see how thing will go until the 1st of September when the royalties of non-exclusive members will be dropped to 40%.

Is Turbosquid lowering the royalty to 40%?

Many 3d artists, including myself make an extra buck by selling 3d models on sites like turbosquid, so you may already be are aware of the fact that turbosquid keeps 50% of everything you sell. If you also take into consideration the fact that your remaining share is subject to a tax (10% – 30%) for vendors outside US, you realize that you end up with pocket change.

But things seem to go even worse…

Some days ago I received a newsletter from the admin at The3dstudio.com, in which he stated that he had been approached by several members that sell models on both TS and his site. These people told him that members from the turbosquid stuff had tried to convince them to sell their models exclusively on turbosquid, in return for higher royality rate of 60%. The bad news is that they were also told that everybody that chooses not to sell 3d exclusively will have the royalty rate reduced to 40%. (Actually he hasn’t specifically named the site, but it was more than obvious that he was talking about turbosquid)
At this royalty rate, if you sell a 50 dollars product, and if you are subject to a 30% tax of what’s left, you end up with 14 dollars (not to mention the bank transfer or paypal withdrawals commissions).
On the other hand, the3dstudio already offers a 60% royalty and promises to give a much higher percent to anyone who decides to go exclusive with them.

From the buyer’s point of view, I believe that TS will become less interesting, due to the fact that most sellers will raise the prices of their products after this.
Already the difference between the prices of similar products on these 2 sites is noticeable, but if this royalty change isn’t just a rumor I’m sure the difference will become much more than noticeable.

I’ve also heard from top sellers (people with more than 1000 products in their inventory) that if this is true they will remove all their models from turbosquid. So far the only reason why turbosquid is ahead of the3dstudio is because of larger inventory, but I guess this can change as well.

Since TS hasn’t given any official response to this yet, we will all have to wait and see.

What about you? Are you selling items on one of these sites? I’m curios to hear about your experiences.

Page 1 of 212